Hydraulic Crimping Heads

Features

Hydraulic Crimp Head – HCH10630

Hand held hydraulic crimp head to accept hexagon profile die sets 10mm² - 630mm².

To crimp 10mm² - 400mm², 13 pairs of C dies required.

To crimp 500mm² & 630mm² you will also require: D410-500 (500mm²) cast die set, D410-630 (630mm²) cast die set.

DA630 adaptor is required to
use with C dies 10mm² - 400mm².

For use with hydraulic, electric and pneumatic pump.

Output: 23 Ton Length: 320mm Weight: 5.6kg

Hydraulic Crimp Head – HCH10400

Hydraulic C head only to accept hexagon profile die sets 10mm² - 400mm².

Dies ordered as required, 13 pairs make full set and can be used with
hydraulic, electric and
pneumatic pump.

Output: 12 Ton
Jaw opening: 30mm Length: 260mm Weight: 4.6kg

Hydraulic Air Pump – PFP

A lightweight single speed efficient pneumatic hydraulic foot pump suitable for the SWA range of hydraulic crimping heads and cable cutters. Supplied with 2m hydraulic hose and 3/8" quick release male coupling.

Dimensions: 380mm x 150mm x 205mm Weight: 6.7kg

Max. pressure: 1st stage air pressure 70-120psi (6-10kg/cm2) 2nd stage 700kg/cm2

Output per stroke: Oil delivery/ ICC stroke 300CC/min

Resevoir capacity: 700CC Oil Port Thread: 1/4 NPT

Hydraulic Pump – HFP1

Two stage foot operated hydraulic pump with automatic release when 700bar/10,000psi pressure is achieved. Complete with 2m hose, male quick release connector and case.

For use with the SWA range of hydraulic crimping heads and cable cutters.

Output: 700bar/10,000psi Length: 710mm
Weight: 13.7kg

Downloads

• Cutting and Crimp Heads
• HFP1 cw CRIMPING _ CUTTING HEADS OPERATING INSTRUCTIONS v4
• Pumps

See product catalogue (in the 'Download' section) for the latest product details